Question:
Do I have to reinstall windows if I replace the motherboard?
Rockstar from another dimension
2006-12-09 22:33:45 UTC
My Asrock (sis chipset) motherboard died the other day, and when I went to buy a new one at the computer store, the guy told me that the only way to replace my motherboard without having to reinstall windows is if I buy another motherboard based on the sis chipset. Well he sold me a MSI K8MM3 , but when I get it home, all the documentation says that it is a via chipset.

I do not want to have to reinstall windows. So should I return this motherboard and find a sis one (seemed hard to find), or will I be fine installing it?
Twelve answers:
deadkelly_1
2006-12-09 22:50:44 UTC
It's a bit hit and miss .... I've had several instances where I've had to change MoBo's and some let you power up and some don't.

If it's an OEM install of Windows then chances are you'll have to re-install because the Windows Registry will not recognise your board ... The computer shop guy was on the right track ... if you can match (or go close to) your original chipset then it should at least boot and let you load the correct drivers .... otherwise it will just loop through the post screen
Prakash V
2006-12-09 22:48:35 UTC
You'll likely take a serious performance hit if you switch motherboards without reformatting, especially with the Via chipset. It's not just a matter of having the same components in the system - you have to think how every device speaks to the other - bus controllers vary from motherboard to motherboard, as do the BIOSes (there is no unified BIOS, yet).



Also, Windows XP is a stickler for changing hardware, especially something that fundamental - lately, they've been very serious about forcing you to call - especially if you had the WGA patch installed.



That being said, it will run. But stability will certainly be questionable.
dmzltc
2006-12-09 22:40:26 UTC
You will not have to actually reinstall windows per se... but you will need to have a reconfiguaration of the operating system so that it can recognize the hardware change(s) you have made.



The procedure for a dead motherboard is basically power down, replace board, boot with operating system CD in the machine, and then select the R option to REPAIR the existing windows installation (this will preserve your files and structure, etc.)



Details are available in a number of places, but start with the Micro$oft site...
anonymous
2006-12-09 22:42:03 UTC
YES!!! The original installed operating system has all the information about the original motherboard stored in it's registry!

The drivers for the different features of the old motherboard and its bios, are all part of the original operating system (WINDOWS).



You must delete the original C: partition, make a new partition, format it in NTFS and install windows. Then you must install all

the drivers and utilities that came with your new motherboard!



Computer Help Page



http://www.diskgenius.com/



http://www.pcbeginner.com/tools/pcdoctor.htm



http://www.pcguide.com/byop/index.htm



http://www.ntfs.com/boot-disk.htm



http://www.softpedia.com/get/System/Boot-Manager-Disk/



http://www.freedownloadscenter.com/Best/ntfs-boot-iso.html



http://www.disk-image.net/products.htm



http://www.bootdisk.com/bootdisk.htm



http://www.errornuker.com/info/01.php?hop=product1



http://www.nu2.nu/pebuilder



http://www.majorgeeks.com/downloads2.html



http://www.ntcompatible.com/Acronis_True_Image_9.0_Build_2337_s61449.html



http://www.theosfiles.com/



http://www.data-recovery-reviews.com/windows-startup-disasterrecovery.htm?gclid=CMSl0b7X2YcCFSJxYAodKy6Lpw



http://www.winternals.com/



http://www.pcworld.com/downloads/file/fid,25181-order,1-page,1-c,alldownloads/description.html



http://www.softpedia.com/get/System/Boot-Manager-Disk/Windows-XP-PowerPacker.shtml



http://www.extremetech.com/article2/0,1697,674406,00.asp



http://windows.about.com/od/tipsarchive/l/bltip632.htm

Visit our Helpdesk for PC Bug Doctor

http://www.maximumsoftwaresupport.com

PC Beginner software

http://www.pchell.com/support/limitedconnectivity.shtml

http://www.nu2.nu/pebuilder/

http://www.bootdisk.com/utility.htm

Chapter 1: Purchasing Components

Chapter 2: Component Overview

Chapter 3: Installing the CPU, Heatsink, and RAM On The Mainboard

Chapter 4: Installing The Mainboard In The Case

Chapter 5: Installing Drives

Chapter 6: Connecting Components

Chapter 7: Installing AGP and PCI Cards

Chapter 8: Testing the System and Completing Assembly

Chapter 9: Installing Windows XP

Chapter 10: Configuring Windows XP

Chapter 11: Installing A Dual Boot Operating System (Linux And Windows XP)

Chapter 12: Home Video -- “So, You Want to Be the Next Steven Spielberg?”

Chapter 13: What’s Next?



http://www.hardwareanalysis.com

http://www.majorgeeks.com/download4007.html

http://www.nu2.nu/bootdisk/

http://www.free-pc-checkup.com/

http://www.pctools.com/registry-mechanic/?ref=Googlebspeed

http://pcperformancetools.com/recovermyfiles.htm



BUILD YOU OWN COMPUTER:

www.directron.com

www.newegg.com

www.monarchcomputers.com
anonymous
2006-12-09 22:36:49 UTC
While you dont actually have to reinstall windows, you can actually just uninstall all the drivers for your old motherboard and install the new ones, I highly suggest that you do reinstall. When you set up windows it sets up to your motherboard configuration, so when you get a new motherboard you should re-set it up. So in short: it is possibly to do it without reinstalling windows, but highly not recommended, and hard to do.
Studio A
2006-12-09 22:39:37 UTC
The guy at the computer store is looking to rip you off. You don't have to reinstall windows to replace your mobo. You may have to reactivate XP. Which is no big deal. But I doubt you will have too. I changed my mobo, video card, memory and never had to reinstall windows.
anonymous
2006-12-09 22:43:24 UTC
He is full of beans! Your hard drive will still have windows on it! You WILL however have to install the right mobo drivers! When you get the new mobo installed, first thing to do is run the driver installation cd!
anonymous
2006-12-09 22:43:10 UTC
Install it start in save mode go to device manager UN install drivers restart computer it will install new drivers.
anonymous
2006-12-09 22:35:54 UTC
No all your info is on the hard drive so just reinstall the hard drive and it will take it from there.
anonymous
2006-12-09 23:19:36 UTC
just install the drivers that come with your new motherboard, it will work fine. may get the blue screen of death if you dont. read your manuals.



-Doc-
anonymous
2006-12-10 04:14:37 UTC
I can give you a link that deals with mother board problems. Please visit the site at http://fixit.in/motherboard.html You may l get some information requiredbu you.
?
2006-12-09 22:36:04 UTC
no long as windows works you don't


This content was originally posted on Y! Answers, a Q&A website that shut down in 2021.
Loading...