Question:
Need some help fixing my pc
Skillz_That_Killz
2008-08-08 09:00:22 UTC
ok well frankly my pc is f*****, when my pc starts it goes onto the windows loading screen and crashes it then goes to "the blue screen of death" and says "irql not less or equal". My pc works in safe mode and whilst in safe mode i went onto device manager which says there are problems with 2 of my drivers (named packet schedular miniport 5 and realtek rtl8187 wireless 802.11g 54mbps usb 2.0 network adapter packet schedular miniport) when i troubleshoot it says i should uninstall and reinstall the drivers, the problem is if i uninstall them will i be able to reinstall them without instalation disks etc as i dont have anything like that, and are the drivers that have problems anything to do with the ram, any help and suggestions would be hugely appreciated thanks for listening.
Four answers:
D
2008-08-08 09:11:06 UTC
You have a network controller problem. If you have Windows XP or newer it should have the realtek drivers included. Depending upon what type of internet connection you currently use you should be able to safely disable one or the other device. If you use wireless, disable or uninstall the USB network. If you connect through a USB card or modem, disable or unistall the Realtek device.



Hope this helps.
2008-08-09 04:21:03 UTC
Hello



Windows 2000/XP adopted the hierarchical structure, its two-also known as the model for user mode (User Mode) and the core model (Kernel Mode), applications can not be direct access to hardware devices, and only by drivers Can directly access.



However, even if the NT framework to stability, as will a number of reasons, such as hardware conflicts, hardware problems, the registry errors, virtual memory, loss of dynamic link library files, resource depletion, this could lead to drivers or Application errors, will be seriously affected even when the core layer. Under such circumstances, Windows operating system will be suspended, and activate the function called KeBugCheck, interrupted by checking all the treatment process and stop with the default code and parameters of comparison, the screen will become blue, and display the corresponding Erroneous information and tips fault, because of this phenomenon when in fact it means that crashes, often called "Blue Screen of Death" (BSOD), also known as the "STOP information" or "stop information."

http://www.Fix-pc-Master.com

Can help you

Good luck
hald a
2008-08-10 02:57:09 UTC
Could be a problem with device drivers, hardware or software. This problem can be solved by uninstalling new softwares, updating device drivers and making minor configuration changes . From http://fixit.in/bluescreenofdeath.html . You can also run a free registry scan using utilities from http://re7.info
2008-08-08 16:09:39 UTC
unistall them. and remove them from te computer and thego to the manufactor web site for both and dowen load the drivers for them


This content was originally posted on Y! Answers, a Q&A website that shut down in 2021.
Loading...