I wanted to erase the existing window Xp and install new,?

Question

I wanted to erase the existing window Xp and install new, but strangely another set of windows xp installed. Now my computer in its start up has two windows (1st and second), suppose if chose first the computer start and it has drive C & D when off this and agian start with the second window xp it has drive C&E . How to erase (formate) these two windows and install fresh one? I have a windows xp CD.

Answer 1

just do this.

-start computer format D drive(-start-my computer-right click D Drive-Format-Quick format-done)



A Windows XP machine in dire need of a fresh start

A Windows XP installation CD with a valid Product Key



Step 1. Back up your data.

First, make sure absolutely NOTHING you cannot afford to lose is on the drive you're going to install Windows on (let's say the C: drive.) Move all your documents and settings off the machine



Step 2 Audit computer

So, before we do anything, we're going to take an inventory of all the hardware you've currently got installed. I used to print a report from Device Manager for this purpose (Control Panel, System, Hardware, Device Manager, Action, Print) but a handy little utility called Belarc Adviser [via Nicholas Roussos] does a nicer job than Device Manager. Belarc will create a report detailing your system, its installed hardware components, software applications and serial numbers.



Step 3. Take a deep breath, and say goodbye to everything on your C: drive.

Seriously. It's all going away now. Nervous? Revisit steps 1 & 2.



Step 4. Insert the Windows installation disk into your CD drive. Shut down your PC. Then, boot from CD.

This part is important: do NOT run the Windows installation from Windows itself. Shut down first, and then boot up the machine from CD. My Dell has a little message as it's booting up that says "Press F12 to boot from CD," so that's what I did. If you're not sure how to boot from CD, check your PC's user guide for more info.



The reason why booting from CD is important is because we're going to delete the C: drive partition where Windows is installed and re-format it. You can't do this if Windows booted from C:, because it can't delete the partition from which it is running.



You CAN install Windows without deleting the partition and formatting, but that means all your program files and other riffraff that's collected on your C: drive will still be there when you're done, just taking up unnecessary space. That's not the point of all this. Be sure to boot from CD.



Step 5. Step through the Windows installation.

You'll be greeted by Word-Perfect 5.1-like blue screens with white text on them, which seem scary, but aren't. All the directions are clearly spelled out on each of them. Still, we'll go over what to do.



At the Welcome to Setup page, press Enter. Press F8 to accept the Windows XP Licensing Agreement. You'll be asked if you want to repair your existing Windows XP installation. Press ESC to bypass the repair and install a fresh copy. All your existing disk partitions will be listed, like this.







You want to delete the current partition where Windows is installed. Use the arrow key to select it, and press D to delete it. Press L to confirm. Then, to create a new partition, select the unpartitioned space and press C. To create a new partition with the maximum amount of space allotted to it, press Enter.



Now select the brand spanking new partition you've just created to install Windows on. Format the drive as NTFS (Quick if you want, but I went thorough just to be sure.) Depending on the size of the drive and how fast your computer is, this will take some time. Get a sandwich. Then, follow Windows Setup's steps, set your area code and name and password and let it reboot as many times as necessary until it asks you to log in for the first time. Congratulations! Welcome to your fresh new Windows installation.



Step 6. Install any missing drivers.

Once you get Windows XP up and running, chances are everything on your computer won't be working perfectly. Are you connected to the internet? Can you play music? Is your screen resolution unusually large? The answer is probably no to all those questions, except the last one. Do not panic. This is the part where you install the right drivers for your hardware. First, get a list of what Windows doesn't have installed correctly. From Control Panel, go to System, then Hardware, and click on the Device Manager. Chances are it'll look something like mine did after my fresh installation:



Step 7. Update Windows.

If you used the Windows installation CD that shipped with your computer three years ago, you've got an old version of Windows that came out 7 service packs ago. As soon as you're online (got that ethernet card/wifi card driver installed?) go directly to Windows Update and patch up Windows nice and tight and secure. Do not wait to do this as there are probably lots of computer baddies just beyond your network card waiting to ravage your virginal machine the minute it's out there alone in the wild internet. Yes, that sounded dirty on purpose.



Step 8. Install all needed software applications and tweak Windows to taste.







ALL DONE!!!!

Answer 2

This has probably occurred because you either did not format your hard disk and/or you installed windows to a second partition without deleting the first. And you have ended up with the new and old installations. I am not sure why booting in one gives you a different drive configuration. But the best thing to do, as you have obviously backed up your data before you tried to re-install windows, is to reformat the C drive [do a full format, not a quick format] and do a "fresh install".

Your explanation is a little hard to understand and it may be that you have installed a new copy of windows on your second hard drive, whilst the first system is still intact on the C drive.

As you have only posted the bare minimum details it is difficult to be sure what has happened. So i would suggest you back up any important data on all the internal drives to a USB external drive and reformat both hard drives in your system. Then do a fresh install of XP on one of the reformatted drives. This method will ensure you only have a single XP installation and will hopefully end your confusion.



Good luck

Answer 3

Normally when you use the automatic loading feature of the win xp cd it will boot up with the win install info and it will detect if any existing operating systems are already installed on the comp.Then it will display the partition that the O/S is on . you want to delete all the existing partitions then create one new partition and then format the drive and then install xp.Note once you delete these partitions and create a new one the system should automatically reboot and start formatting.If not once you go to use your install disk the software should then request that the hard-drive is formatted.





Hope that helps and best of luck.

Answer 4

First format first drive through window setup CD .when format completes immediately power of your PC and again run CD and then format the drive in which you want to install and then format that drive. first format the drive in which you don't want to install windows. thus both drives are formated and new window is installed