Do newer motherboards still support IDE?

Question

i am getting a new computer next month and want to transfer the data from my old computer hard drive to the new one, so i want to know if i can just attach the ide cable to do this, i will just be putting in the old hard drive aswell if the case has room for it(dell dimension e521)

Answer 1

They have to have IDE, because the CD/DVD drives still use IDE, so the computers still have to have IDE.



EDIT: Well forget what I just said. I was answering a question for someone else and I looked up the specs on the E521, and in fact it doesn't have any IDE, it uses an SATA CD/DVD drive. So in order to complete your plan you will have to purchase one of two things, either an IDE PCI controller or an external enclosure to convert your hard drive to an external hard drive.

Answer 2

I think most new boards will still support IDE and also sata drives.

If this is suported there will be plenty of room inside a full size case.



If not you can get an enclosure that turns the old ide drive in to a USB drive. think cheap ones are around £20 or so

Answer 3

most do have ide support and sata now these days, but I believe the dell dimension is e521 is sata only including cd/dvd-rom drives, best thing to do is contact dell and ask before getting the new computer

Answer 4

Most newer motherboards are backwards compatible with older IDE hard drives.

I'm running a old 4.3gb hard drive on a new Pentium LGA 775 motherboard with no problems at all.

This motherboard has SATA, RAID and a bunch of unknown connectors but it's still backwards compatible with IDE.

Answer 5

Many new computers do not help PATA/IDE drives, FDD (Floppy disk drives) or PCI (non-show) growth enjoying cards. those technologies at the instant are not to any extent further cutting-edge, and are of no interest to mainstream consumers. this is in simple terms been interior the final couple of years that annoying tension circulate speeds have many times been in a position to outstrip even the previous ATA-133 (renamed PATA) standard of 133 MB/s. yet speedier specs sell extra computers. sure, the SATA interface can help 350 MB/s (3 gbps) yet you will in simple terms get a handful of bytes at that speed, then the annoying tension drops all the way down to this is maxiumum sustainable circulate value of one hundred ten MB/s or so. Intel screwed up on their chipset, whether this is in simple terms happenstance that the blunders affected SATA. the comparable type of layout blunders in a distinctive component to the chipset would have broken USB help. malicious program fastened designs at the instant are being shipped and Sandy Bridge processors seem to be changing exceptionally lots each previous Intel sequence with superb overall performance and useful value. I in simple terms wish AMD can save up the competition. while Intel replaced into unchallenged in cpu manufacture, costs have been intense and stayed that way. opposition could be a surprising undertaking.

Answer 6

Yes, new motherboards still support IDE. You'd probably be hard-pressed to find a motherboard without SATA now, but there will should definitely be IDE. Just double check before you buy.

Answer 7

Some do some don't. If you're installing the old HDD in the new system then you can draw your info that way or use a crossover cable in from the new to the old works well too.

Answer 8

Yes most still support IDE. One thing to lookout for is that most call it PATA now instead of just IDE.

Answer 9

yes, most support IDE and SATA!!!