My computer intel pentium D - CPU 2.66 GHz with 448 MB RAM. Is it P-1,2,3 or 4? Plz tell others config also?

Question

Config of P-1, P2, P-3 and P.4

Answer 1

Its like dual celerons! For a P4 would have hyperthreading and you would see 4 CPU performance lines in the performance boxs

Answer 2

OK, here is the problem, the GHz are not a good measure of the computer's power (see the powerpc chips kicking the butt of x86 a few years ago, with 800MHz) The celeron is a low end type of processor, it works and gets the job done, but if you put it on something really complex (like playing a new video game) it will probably have problems. The Penitum D was some of the last pentium type of processors, it is almost 2 pentium 4 hold together by duct-tape. It is fast and it will work better than the Celeron. You will have problems running Vista with all blls and whistles, but with Aero turned off they should work pretty well, specially the one with the pentium D.

Answer 3

Your processor is an Intel Celeron D Pentium-4 processor on a 478 pin arrangement with a front side bus speed of 533Mhz also known as a "Prescott" core.

Your processor does not support Hyper-Threading.

Your processor is of the second generation of Pentium-4 processors.

First generation P-4's are from 1.4Ghz to 2.6Ghz 400mhz fsb.

Second generation P-4's were 2.66Ghz to 3.06Ghz 533mhz fsb

Third generation P-4's were 2.8Ghz to 3.4Ghz 800mhz fsb

Fourth generation P-4's introduced Hyper-Threading, a process where the single processor acts as if it is actually two seperate processors running at the same time. This allowed users to do multiple tasks at the same time much faster than before. They were from 2.8Ghz to 3.6Ghz 800mhz fsb and were on a 775 pin die arrangement.



P-1's were from 75mhz to about 266mhz speeds

P-2's were from 333mhz to 600mhz and wwere available in either a Slot-1 or Socket 7 interface

P-3's were one of the most popular chipsets ever and were available in speeds ranging from 450mhz to 1.2Ghz with fsb ranging from only 100mhz, to 400mhz.

I still have two P-3 1.2Ghz processors in two older PC's that are running Win Xp Pro and are still in use today.



Today, you can get processors that have up to 4 cores called "Quad-Core", and running 1200mhz or faster fsb speeds.





And to the other posters, Pentium D has been around since at least 2002, which is when I purchased my Pentium D Celeron 2.66Ghz processor. Do not confuse it with the newer Pentium D processors that are still available today. They are completely different.

Answer 4

pentium d is not at all the same family as p-1, 2, 3, or 4.

Answer 5

when you say you have a computer with this kind of specs, intel pentium d - it means that you recently purchase this computer. pentium d is a higher version of pentium 4.



from pentium 4 it becomes pentium 4 HT then it becomes pentium d, then pentium d duo, pentium d duo dual core, pentium d duo quad core. add more memory to your computer and try to use a video card that isnt build in the mainboard

Answer 6

its not 1, 2, 3 or 4. it is pentium D.. another model of processors which is dual core... the next model after pentium 4

Answer 7

You have P-4 computer. I also have the computer P-4 having configurarion as under:-

1-CPU-2.66 Dual core

2-256 MB Ram

3-80 GB hard Disk.

4-Optical mouse & multimedia Keyboard.

5-Intel Origional Mother Board.



Be carefull while buying motherboard.

Always bvuy the motherboard of INTEL.Because the life of the motherboard of INTEL is Long As compare o Chipset. The life of the chipset motherboard is nearly 2 or 3 years only when u keep it clean.





Don't worry you have P-4.

Answer 8

Pentium D is the latest version .it is the development of p4.it act 2 processor in a single mother board

Answer 9

tommy G is correct.